A.low air charge temperature
B.high cranking speed
C.excessive fuel dilution of lube oil
D.high compression pressure
您可能感興趣的試卷
你可能感興趣的試題
A.fuel lines
B.lube oil filter
C.crank case pump
D.rocker arm reservoir
A.turn engine with jacking gear
B.drain filters and strainers and bleed off water at each injection pump
C.use ether to start the engine with blow-down valves open
D.blow through the cylinders and fuel lines with a drying agent
A.Compression ratio
B.Fuel/Air ratio
C.Compression pressure
D.Lube oil pressure
A.test the starting system
B.remove condensation from the cylinders
C.check the compression
D.check for proper lube oil pressure
A.turn the flywheel
B.reduce friction
C.overcome inertia
D.ignite the fuel
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Cold weather starting of a diesel engine may be made easier by（）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
The treatment of the fuel oils involves storage, heating, filtering and（）