A.check the cylinder exhausts for black smoke
B.listen for combustion knock in that cylinder
C.isolate each cylinder and inspect the injector
D.check the cylinder exhaust temperature frequently
您可能感興趣的試卷
你可能感興趣的試題
A.passing the exhaust through long head pipes
B.diffusing exhaust vibrations through activated carbon baffles
C.increasing the exhaust gas velocity
D.reducing the exhaust gas velocity
A.stop the engine immediately to prevent damage
B.increase lube oil pressure
C.slow the engine allowing it to gradually cool
D.decrease the cooling water it temperature to the water jacket
A.worn cylinder liner
B.faulty cylinder relief valve
C.excessive lube oil pressure
D.excessive scavenge air pressure
A.reduce heat radiation to the engine room
B.aid in preventing turbocharger overheating
C.condense and drain moisture from exhaust gases
D.dampen exhaust gas pulsations in the manifold
A.compression pressure
B.lube oil header pressure
C.scavenge air pressure
D.piston ring blow-by
最新試題
If separating effect is not good, which measure should be taken ()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
Which of the following items don’t belong to dock repair works?()
To proceed to the assistance of a ship in distress is()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The treatment of the fuel oils involves storage, heating, filtering and()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The cetane rating of diesel fuel is an indication of the ()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()