A.large dirt particles in the oil supply
B.insufficient lubricating oil and overheating
C.normal wear
D.water contamination of the lube oil
您可能感興趣的試卷
你可能感興趣的試題
A.excessive lube oil pressure
B.the proper seating of new rings
C.a worn cylinder liner
D.a malfunctioning cylinder relief valve
A.starting the engine while hot
B.knurling the piston skirt
C.operating the engine overheated
D.scuff resistant piston rings
A.space limitations prevent separately run pipes
B.the engines are small auxiliary units
C.they are arranged to prevent gas backflow to each engine
D.a waste heat boiler is installed
A.worn connecting rod bearings
B.worn engine cylinder liners
C.high cylinder firing pressure
D.stuck spring-loaded manhole covers
A.chromium plating piston rings
B.knurling the piston skirt
C.extended maximum power operation
D.applying load to a cold diesel engine
最新試題
If separating effect is not good, which measure should be taken （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
To proceed to the assistance of a ship in distress is（）
Using a file without a handle may result in （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The main purpose of port State control is not to（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The condensers located in various stages of a flash evaporator are cooled by（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）