A.liquid in the cylinder
B.low compression in the cylinder
C.high exhaust temperature
D.poor fuel penetration
您可能感興趣的試卷
你可能感興趣的試題
A.amount of scavenge air to the cylinder
B.quality of fuel injected
C.viscosity of the lube oil
D.compression ratio of the piston
A.compression must be low for effective spark ignition
B.compression must be low for required horsepower and torque generation
C.compression must be low to prevent pre-ignition
D.compression must be low to have effective pre-ignition
A.provide exhaust back pressure
B.prevent exhaust smoke emissions
C.power a reciprocating supercharger
D.muffle exhaust gas noise
A.Plugged injector nozzles
B.Excessive fuel injection
C.Very late injection timing
D.Incorrect crankshaft clearance
A.a glazed surface on the spring
B.nicks in the protective coating
C.a build up of sludge deposits
D.cracks in the surface of the spring
最新試題
Diesel engine air start system check valves are opened by ()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The condensers located in various stages of a flash evaporator are cooled by()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which of the following items don’t belong to dock repair works?()