A.on the power stroke
B.on the exhaust stroke
C.at the end of the power stroke
D.at the start of the intake stroke
您可能感興趣的試卷
你可能感興趣的試題
A.early fuel injection timing
B.leaking valves
C.a continuously open scavenge air port
D.low cooling water temperature
A.clogged air filter
B.compression stroke
C.burned exhaust valves
D.all of the above
A.intake stroke
B.compression stroke
C.power stroke
D.exhaust stroke
A.When heated, it will move proportional to the amount the metal has lengthened or expanded
B.The pointer associated with the pyrometer scale can be made to also measure engine RPM
C.It can be utilized in exhaust manifolds and heat exchangers interchangeably
D.It can indicate temperature at a distant point from the source heat
A.Low compression pressure and high exhaust temperature
B.Low firing pressure and high exhaust temperature
C.Low compression pressure and low exhaust temperature
D.Low firing pressure and low exhaust temperature
最新試題
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Diesel engine air start system check valves are opened by ()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The condensers located in various stages of a flash evaporator are cooled by()
The shipboard oil pollution emergency plan will be invalid after ()
Under MARPOL Code the ship to which it applies has to carry ()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()