A.a restricted air intake
B.a clogged connecting rod oil passage
C.incorrect connecting rod alignment
D.high cylinder firing temperatures
您可能感興趣的試卷
你可能感興趣的試題
A.a higher cetane number of fuel oil
B.the diesel fuel used having a high viscosity
C.mechanical rigidity in the lube pump mechanism
D.a decrease rigidity in the fuel pump delivery pressure
A.Higher compression ratios create higher temperature
B.Higher temperatures create higher compression ratios
C.low temperatures create higher compression ratios
D.Higher compression ratios create low temperatures
A.torque wrench
B.monkey wrench
C.pipe wrench
D.slugging wrench
A.Electric
B.Hydraulic
C.Air
D.All of the above
A.build up the piston crown by metal spraying
B.build up the cylinder head by metal spraying
C.insert shims between the crankpin bearing box and the connecting rod foot
D.install a thinner head gasket
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The ISPS Code consists of a mandatory section-Part A, which shows（）
The treatment of the fuel oils involves storage, heating, filtering and（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
If separating effect is not good, which measure should be taken （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish