A.Visual inspection of the element
B.the pressure drop cross the filter
C.high fuel oil tank temperature
D.increase flow rate from the filter
您可能感興趣的試卷
你可能感興趣的試題
A.improper adjustments
B.contaminated fuel
C.kinked fuel lines
D.excessive engine vibration
A.heavy carbon deposits will buildup on the valves and in the exhaust
B.fuel dilution is increased at low load
C.exhaust valves may be damaged
D.all of the above
A.governor malfunctions
B.fuel injection system malfunctions
C.high cylinder lube oil temperatures
D.low intake temperatures
A.air quantity aspirated
B.fuel injection pressure
C.combustion pressure on the power stroke
D.compression on the compression stroke
A.incorrect adjustments
B.dirty fuel
C.broken fuel lines
D.excessive vibration
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The main purpose of port State control is not to（）
Under MARPOL Code the ship to which it applies has to carry （）
The treatment of the fuel oils involves storage, heating, filtering and（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The cetane rating of diesel fuel is an indication of the （）
Using a file without a handle may result in （）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）