A.lower thermal expansion rates than wet liners
B.greater heat transfer rate than wet liners
C.greater wear resistance than wet liners
D.procedure to replace dry liners is simpler than for wet liners
您可能感興趣的試卷
你可能感興趣的試題
A.exhaust gas pressure
B.exhaust gas temperature
C.speed
D.load
A.Viscosity is decreased
B.Octane number is altered
C.Pump speed is decreased
D.Blower’s speed is decreased
A.of the thin wall thickness
B.honing makes it easier to maintain the desired oil ilm
C.water seals are not required
D.it fits more loosely due to a decrease in heat transfer through the composite wall
A.Constant pressure
B.Pulse
C.constant velocity
D.Axial flow
A.Fuel injection timing will change
B.Nozzle operation will be unaffected
C.Fuel will leak into the drain line
D.Fuel will not be delivered
最新試題
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Cold weather starting of a diesel engine may be made easier by（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
The condensers located in various stages of a flash evaporator are cooled by（）
The ISPS Code consists of a mandatory section-Part A, which shows（）