A.low lube oil temperature
B.low lube oil pressure
C.high exhaust temperature
D.high cooling water pressure
您可能感興趣的試卷
你可能感興趣的試題
A.Dirty lube oil filter
B.Too much piston ring wear
C.High lube oil viscosity
D.Low lube oil temperature
A.The oil oxidizes and forms carbon deposits
B.The viscosity increases
C.Engine oil consumption decreases
D.Lubricating qualities of the oil are enhanced
A.pitting
B.sludge
C.hard varnish
D.all of the above
A.increase ignition delay
B.affect fuel oil metering
C.affect engine performance at low speed
D.only disappear due to fuel oil abrasion
A.oil foaming will occur
B.large quantities of oil are consumed
C.lube oil viscosity is always decreased
D.corrosive by-products are usually formed
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The main purpose of port State control is not to（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
The treatment of the fuel oils involves storage, heating, filtering and（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）