A.Shape of the piston crowns
B.Increasing the compression ratios
C.Increasing the piston crowns
D.Increasing the turbocharger gear ratio
您可能感興趣的試卷
你可能感興趣的試題
A.Spark plug
B.Heat of compression
C.Carburetor
D.Glow plug
A.low compression temperature
B.low ambient air pressure
C.high lube oil pump pressure
D.high fuel oil booster pump pressure
A.later and closing earlier
B.later and closing later
C.earlier and closing earlier
D.earlier and closing later
A.quantity of fuel injected is decreased
B.quantity of fuel injected will always be increased
C.start of injection is advanced
D.duration of injection will always be greater
A.Over speed
B.fire improperly
C.lose oil pressure
D.overheatrapidly
最新試題
The ISPS Code consists of a mandatory section-Part A, which shows（）
The condensers located in various stages of a flash evaporator are cooled by（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Under MARPOL Code the ship to which it applies has to carry （）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The main purpose of port State control is not to（）