A.Each engine must have its own engine driven cooling water pump capable of providing cooling for all ranges of operation
B.propulsion engines with bores exceeding 200 mm are to be fitted with a means to display the cooling water temperature of each cylinder
C.At least two independent sea suctions are to be provided for supplying water to the engine jackets or to the heat exchangers
D.Suitable strain are to be fitted between the circulating pumps and heat exchangers when sea water is used for direct cooling
您可能感興趣的試卷
你可能感興趣的試題
A.a clogged filter element
B.excessive lube oil pump discharge pressure
C.excessive lube oil flow
D.excessively hot lube oil
A.improper venting of the cooling system
B.carrying the expansion tank water level too high
C.a totally clogged impeller in the cooling water pump
D.an incorrectly set cooling system temperature control
A.crankcase
B.low lube oil temperature
C.excessive oil consumption
D.low bearing oil pressure
A.cam action
B.spring force
C.fuel oil pressure
D.firing pressure
A.An open vent in the cooling system
B.A fouled sea chest
C.A restricted water passage in the engine
D.Air entrained in the cooling water
最新試題
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Under MARPOL Code the ship to which it applies has to carry （）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The treatment of the fuel oils involves storage, heating, filtering and（）
The main purpose of port State control is not to（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish