A.have a larger than normal dead band
B.produce excessive speed response to a load change
C.respond slowly to any change in engine load
D.stabilize engine speed at the new governor setting
您可能感興趣的試卷
你可能感興趣的試題
A.plating forming the engine room tank top
B.doubler plating installed over the flat keel plate
C.a watertight boundary formed by the inner bottom
D.compartments between the inner and outer bottoms
A.auto-ignition point
B.flash point
C.burning temperature
D.fire point
A.double bottom fuel oil tank temperature
B.heater supply steam flow
C.pressure of the fuel supplied to the burners
D.attemperator steam flow in the heater discharge circuit
A.have no plating joints of 90
B.retain the lube oil as long as possible before it recirculates through the system
C.provided drain/return lines that are no greater than 24 inches from the pump suction
D.be provided with only a perfectly horizontal bottom
A.cause an alarm condition
B.secure power to the indicator
C.secure power to the monitored device
D.automatically recluse within 10 seconds
最新試題
Which of the following items don’t belong to dock repair works?()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
() is not installed on the main switchboar.
The condensers located in various stages of a flash evaporator are cooled by()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
Under MARPOL Code the ship to which it applies has to carry ()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()